Product

PDC Drill Bit 8 1/2” LM845GL

Applicable strata: Extremely soft formations with low compressive strength, such as clay, siltstone, sandstone, and more.

PDC Drill Bit 8 1/2” LM765GS

Applicable formations: Medium-hard formations with moderate compressive strength and abrasive interlayers, such as limestone, anhydrite, dolomite, sandstone, shale, and others.

PDC Tread 9" LM855GX

Applicable strata: Medium-soft, low-compressive-strength homogeneous interbedded formations such as clay, mudstone, anhydrite, tuff, and more.

Tricone Hole Opener

Applicable formations: Medium-to-soft formations with low compressive strength and relatively hard, abrasive interlayers, such as hard shale, sandstone, anhydrite, dolomite containing interlayers, and soft limestone, among others.

Tricone Hole Opener

Applicable formations: Low compressive strength, moderately soft formations with harder, abrasive interlayers, such as hard shale, hard stone casing, soft limestone, sandstone, and dolomite containing interlayers, among others.

Tricone Hole Opener

Applicable formations: Low compressive strength, moderately soft formations with harder, abrasive interlayers, such as hard shale, anhydrite, soft limestone, sandstone, and dolomite containing interlayers, among others.

Tricone Hole Opener

Applicable formations: Low compressive strength, moderately soft formations with harder, abrasive interlayers, such as hard shale, anhydrite, soft limestone, sandstone, and dolomite containing interlayers, among others.

Tricone Hole Opener

Applicable formations: Low compressive strength, moderately soft formations with harder, abrasive interlayers, such as hard shale, hard gypsum-sandstone interbedded rocks, sandstone, and dolomite containing interlayers, etc.

Mud Motor

Drill string model: 5LZ95 × 7.0 L-5 Outer diameter: 3 3/4″

Mud Motor

Drill string model: 5LZ120 × 7.0 Outer diameter: 4 3/4″

Mud Motor

Drill string model: 7LZ120 × 5.0L-7 Outer diameter: 4 3/4″

Non coring bit

Mainly used for drilling gas drainage holes, discharge water holes, grouting holes, etc., it is also widely used in oil and gas drilling, geothermal development, water well drilling, engineering geological exploration and other fields, and can adapt to various geological conditions.

PDC Reamer

With the popularization of PDC bits and the improvement of PDC cutter technology, the PDC bits are gradually replacing the tricone bits in various strata.